Home Technology Proven Ways to Fix Linksys Extender WiFi Issues

Proven Ways to Fix Linksys Extender WiFi Issues

Nowadays, we’ve become so addicted to the internet being 24 hours available for web surfing, online streaming, and web gaming. We can’t even think of moving a single step without it. And when we experience no internet connectivity, our life suddenly freezes. So, to fix issues like no or slow internet, one might opt for Linksys WiFi range extender. Well, that’s the good thing. A Linksys WiFi range extender allows you repeat the existing wireless signals of any access point, router or modem to provide uninterrupted Internet connectivity in hard-to-reach areas of your house through a wired or wireless connection.

Though Linksys extender is a smart device to vanish all the dead zone areas in your house but it is also prone to major technical issues. There is nothing to worry. Issues with Linksys extender is faced by every user today. And one of the most common that is faced by everyone no or slow WiFi after Linksys extender setup. If you are also one of them, then this write-up would prove helpful to you.

Simply follow the troubleshooting tips given below in exact order and fix the WiFi-related issues with your Linksys extender like a pro. Keep scrolling down!

Where have you placed your Linksys WiFi extender?

The location of Linksys WiFi range extender matters a lot. If you have placed your Linksys extender on a lower surface, inside cabinet or away from the reach your existing router, then facing WiFi connectivity issues with your Linksys extender is obvious. The WiFi connectivity issues with your Linksys extender can easily be fixed if you place it openly, near to your router, and at the center area of your home.

Have you set up your Linksys extender properly?

Improper or partial installation of Linksys WiFi extender can also leads to connectivity issues. So, to fix it, simply make sure to configure and install your Linksys WiFi extender properly using the correct setup steps given in the manual.

To which network you have connected your Linksys extender?

If your Linksys extender is connected to a wrong network then also WiFi connectivity issues can appear. To fix all the mess of slow WiFi, connect your Linksys extender to the router’s WiFi network.

Have you updated the Linksys extender’s firmware?

Yes, you read it right! An obsolete firmware on your Linksys extender can pull you into troubles like no or slow WiFi. In order to boost up your Linksys extender’s WiFi performance, simply update its firmware to the latest version. To check for the updates:

  • Open a web browser on a PC or laptop.
  • Enter extender.linksys.com into its address bar field.
  • Provide the default Linksys range extender login credentials.
  • Click on the Log In button.
  • Check for the latest firmware updates for your Linksys WiFi extender.
  • And if the updates are available for your device, simply follow the on-screen instructions to get the job done.

Which SSID you are using?

This also matters a lot. If you haven’t changed the default SSID of your Linksys extender, WiFi connectivity issues with Linksys extender is common. So, to avoid unknown people to have access on your extender’s default SSID, simply swap it with new, unique, and strong one.

Tip: Disable the extender’s SSID.

Have you reset your Linksys extender?

Linksys extender reset process is not only meant if you have forgotten your device login details or failed to set it up. The process is also meant to fix issues like slow or no WiFi. So, if the above-mentioned troubleshooting tips haven’t helped you out to fix WiFi issues with your Linksys extender, simply reset it back to the factory default settings. But prior to the reset process, don’t forget to take the backup of your extender’s settings. After the reset process, you have to set up your Linksys extender again using the default login details and installation steps.